It states "Run your pump a minimum of 8 hours a day and adjust your cell output so your FC stays between 3-5 ppm."
This is really oriented toward the higher end SWGs...but your pump will/should run independent of the SWG. You basically set the intex swg to run for a certain # of hrs during your pump run time.
For intex SWGs it only runs at 100% for the # of hours you set it and it turns on at the same time every day, unless there is a power outage. I personally just follow the non-swg FC guidelines for water chemistry, except for CYA which I keep at 60-70. My pump runs for 6hrs per day and my intex swg runs for 3 hrs. Unfortunately with the intex, you don't get chlorination over a long period of time...it comes in 3-4 hour bursts