Hello, I just finished draining and cleaning my pool. It is about 6 inches from full right now and still filling up. Below are my test results
FC 0
PH 8
TA 120
CYA 0
I just need to bounce off what i think i learned using the pool calculator.
I am going to add 29 ounces of Muratic acid to lower my PH from 8 to 7.5 then I am going to add 261 ounces of 6% bleach to rais my FC from 0 to 7 tonight (testing it each morning until i realize what the drop is each night)
I know my CYA is way low, it says add 96 ounces by wweight or 249 ounces liquid of stabilizer. this is where i am stuck. what can i use as stabilizer? i read pool school and it says Cyanuric acid but i am not sure where to get that.
Am i missing anything else that needs to be done? With no chlorine right now because it is filling up the water is a very faint shade of green/blue. super clear for now.
Any advice is appreciated.
FC 0
PH 8
TA 120
CYA 0
I just need to bounce off what i think i learned using the pool calculator.
I am going to add 29 ounces of Muratic acid to lower my PH from 8 to 7.5 then I am going to add 261 ounces of 6% bleach to rais my FC from 0 to 7 tonight (testing it each morning until i realize what the drop is each night)
I know my CYA is way low, it says add 96 ounces by wweight or 249 ounces liquid of stabilizer. this is where i am stuck. what can i use as stabilizer? i read pool school and it says Cyanuric acid but i am not sure where to get that.
Am i missing anything else that needs to be done? With no chlorine right now because it is filling up the water is a very faint shade of green/blue. super clear for now.
Any advice is appreciated.