Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 17 of 17

Thread: viking fiberglass pool

  1. Back To Top    #1

    viking fiberglass pool

    Anyone have expereince/advice concerning purchase and install of a Viking fiberglass pool? They seem to be the best, just wondering if anyone has owned one for a few years.
    62,800 Litre IG Vinyl
    Sand Filter
    1HP Super Pump
    Clearwater/Zodiac LM2-24S SWG
    Aquabot Turbo Robot Cleaner
    250K NG Heater

  2. Back To Top    #2
    Though not a Viking Pool, I have owned a Fiberglass pool for several years. I absolutely love it! Mine was made locally in Middle Tennessee by C&W pools. The ONLY complaint I have is that it develops yellow stains where the manufacturer sprayed the gel coat in stages. So after 6 weeks or so I get these 4 yellow (dull/dingy-not bright) stripes across the bottom and in some places along the wall. It isn't really that bad and if my water weren't so darn clear :P , you may not notice them. They are however easy top treat with ascorbic acid and Metal-Out. We opted for the Cantilever deck and even put in tile around the top. Unfortunately, I have sold the house and will be moving in a week. The new house has a Vinyl I/G that is nice, but it just isn't MY pool. Hopefully I can replace it with a Fiberglass Pool down the road. Obviously, I think Fiberglass is the way to go.

    Dave
    (attached is an old picture showing the tile and cantilever deck right after we finished filling the pool)

    Edit: Can't seem to get the picture attached

  3. Back To Top    #3
    DONNIE's Avatar
    Join Date
    Mar 2007
    Location
    OKLAHOMA
    Posts
    122
    I did a bunch of research, called a bunch of references and even went and looked at some of my PB's work. We have the Viking Baja and couldn't be happier. The pool is perfect in every way and even though it was filled the first week in December, the water chemistry has been a breeze.

    Donnie
    8500 Gallon Fiberglass IG / Sta-Rite pump,cartridge filter & heater / PoolPilot Dig 220-36 SWG / Testing w/K2006

  4. Back To Top    #4

    Join Date
    Mar 2007
    Location
    Central NC
    Posts
    18

    Viking/CPC Hydrozone 'A' model as of today

    It has been quite a journey to get to today, but we are very pleased with the product . . HOWEVER, not the Viking PB in our area or the 'Viking' company as they don't hold the PB associated to them accountable so be very careful to talk with other owners by this same PB in your area. The shell manufactured by CPC for Viking is very, very well manufactured. It took a lot of effort (an the help from another on this forum who had also been down this same avenue with a Viking PB in there area) to get the shell from CPC in order that we could finish the project ourselves (DIYer) . . . but what a wonderful, wonderful shaphire blue fiberglass pool. The solar was turned on today; we should be swiming in a day or so. The deck goes in next week and then I'll post more pictures. I wish you well with your project and if you have a good Viking PB in your area, you will be very pleased. But please, check them out or you may be stuck having to do the job yourselves as we were.
    Attached Images Attached Images
    6500 gal. Fiberglass HydroPool w/SWG = 9' x 18' x 6';

  5. Back To Top    #5

    Join Date
    May 2007
    Location
    Massachusetts
    Posts
    3

    viking fiberglass pool

    I had a Viking pool(16 x 40 carribean) installed last year & I LOVE it! Our PB was excellent and I have had no problems at all. I would HIGHLY recommend the in-floor Vantage cleaning system....NO vacuuming
    at all....the most I get is a small "collection" near the main drain and I push it with the brush attached to my skimmer pole and VOILA all gone! Hope this helps ...kim

  6. Back To Top    #6

    Re: viking fiberglass pool

    Quote Originally Posted by kimalmac
    I had a Viking pool(16 x 40 carribean) installed last year & I LOVE it! Our PB was excellent and I have had no problems at all. I would HIGHLY recommend the in-floor Vantage cleaning system....NO vacuuming
    at all....the most I get is a small "collection" near the main drain and I push it with the brush attached to my skimmer pole and VOILA all gone! Hope this helps ...kim
    I'm seriously considering a Viking FG pool. Are you concerned at all that the in floor cleaning system may get heads/valves stuck or damaged down the line? I'm thinking of foregoing the in floor cleaning and getting a robotic cleaner. I'm thinking that when the robot breaks down, I can have it serviced out of the water, or replace it with a newer model. Any pro/cons for the in-floor vs. the robot?
    17,500g, IG pool/spa, pebblesheen, Autopilot TC SWG, Pentair 4x160 variable speed pump. Sta-rite cartridge filter, Sta-rite Gas heater, Polaris 280 cleaner

  7. Back To Top    #7
    Guest
    In floor cleaning systems put a LOT of backpressure on the plumbing each time the manifold changes to a different set of popups. Just watch the pump pressure gauge on a system where one is installed to see what I mean. They work but they do not eliminate brushing. Actually, none of the cleaning systems (infloor, pressure, suction, or robotic) will eliminate brushing. The biggest problem with in floor cleaning systems is if they ever need service. I also question whether they are necessary in a fiberglass pool since nothing really sticks to it and a good brushing will get all the dirt into the water so the filter can take it out. If you have a problem with leaves or other large debris then you will need to have a leaf trap installed with the in floor cleaner! Robots and pressure side systems handle things like leaves much better than suction side cleaners (and in floor cleaners are really just very fancy suction side cleaners--all the dirt goes into your filter!)

  8. Back To Top    #8
    mbar's Avatar
    Join Date
    Apr 2007
    Location
    Ashland PA
    Posts
    257
    Although I don't have a Viking fiberglass pool, I have one made in NJ by Waterworld, I love mine. This is the eighth season for me. Best of Luck
    16x33 fiberglass pool sand filter

  9. Back To Top    #9

    Join Date
    May 2007
    Location
    Massachusetts
    Posts
    3

    viking pool with in floor cleaning system

    I guess it probably would be easier to fix a robot than an in floor system, but for me it was a good option for a couple of reasons 1. my DH didn't want a pool and does NOTHING for it's maintenance, and I have 3 girls including a set of 5/yr old twins 2. For everyone I know who has the robot (including my mother) it seem like a daily chore(that I don't have the time for).
    This is only my 2nd year with the pool so I can only guess as to break down issues but here's my .02.... The heads in the floor are individually replaceable, valve is above ground and, there are several underground pipes which I guess could be a problem(but no more than other pipes for skimmer, drains, etc). As waterbear says You definitely still need to brush the pool, and not much sticks to the fiberglass(makes cleaning & maintenance easier to start with), and large debris could be a problem(I'm close to the ocean & I get very few leaves but I do get dirt/sand from lots of little feet ).

    In the end, I'm not an expert and maybe a little spoiled & naive, but I'm happy! Hopefully, my in floor cleaner will last many years...if not....I'll have to get a robot.

    stevet1...No matter what... you'll love your viking pool! Mine is sapphire blue with borrego tiles in lake blue(nice combo, suggested by my sales girl), 1 cascade, 2 fiber optic lights(if you like a lot of light make sure you spring for more lights....these are not too bright more of an accent....I could have used 1 more).

  10. Back To Top    #10

    Re: viking fiberglass pool

    I love my Key West Viking Pool. The sapphire blue is very nice and the pool is easy to maintain.
    Viking Pool - Ceramic Fiberglass - Key West Sapphire Blue - 9,000 gallons
    Aqua Rite Goldline SWG
    Sta-Rite PXC150 Cartridge Filter
    Sta-Rite MPRA6F-148L 1.5 hp Pump

  11. Back To Top    #11

    Re: viking fiberglass pool

    We have the gulf coast viking fg pool and we are happy with it. Now if we can only get rid of the stains.

    I have asked this question before and got a detailed answer of how to treat it but it requires dropping the chlorine down to zero and right now I would hate to do it because we just balanced the water after two weeks and it finally looks great.
    20,000 gallon viking fiberglass pool w/aqua comfort heat pump, pentair whisperflo pump 1.5hp autopilot dig-220 swg w/RC42 cell (42,000), pg2000 fiber optic lights
    hayward sand filter(medium is echoglass)
    Blue diamond robot cleaner

  12. Back To Top    #12
    mbar's Avatar
    Join Date
    Apr 2007
    Location
    Ashland PA
    Posts
    257

    Re: viking fiberglass pool

    Try adding some metal out, while keeping the ph at 7.0 - it should lighten up the stains. If not, then wait till you have a problem with your water, and you have to rebalance anyway. One thing when dealing with a fiberglass pool is to make sure that your ph doesn't go above 7.4 - if you have any metal in your water and your chlorine is high along with ph over 7.2 - 7.4, metals will fall out and stain the pool, especially if there is not enough sequestering agent in the water.
    16x33 fiberglass pool sand filter

  13. Back To Top    #13

    Join Date
    Jul 2013
    Location
    Waxahachie, Tx.
    Posts
    389

    Re: viking fiberglass pool

    Getting ready to install a Viking pool see my signature. End of Feb for install. Will post update at thattime
    12 x 26 Viking FG IG, Bermuda Model, 3 1/2' to 5', 7000 Gallons, Diamond Series Maya, Hayward 1 1/2 HP Maxflo VS, Hayward Stay Clear Plus Cart Filter C17502(S), Hayward Aqua Rite SWG w/T3 cell, Color Changing FIBERSTAR Lighting, Aqua Bot Supreme Robotic cleaner, Brushed Concrete with CCI Liberty Tan color, Taylor K-2006 test kit, Armor Foundation penetrating concrete sealer(lifetime warranty).

  14. Back To Top    #14

    Join Date
    Jul 2013
    Location
    Waxahachie, Tx.
    Posts
    389

    Re: viking fiberglass pool

    Finally got pool installed. So far very pleased. Even though it's only been a couple of weeks.. for the most part about 90% satisfied with installer. One glitch was when th deck was poured and the brushed finished was being done. Had I not been home supervising, the brush strokes would have not been symmetrical. They would not budge at all on discounts. And there was no timer in the electrical system. When I realized this I contacted the COO of the company and he said that it was not needs since I am using a very high efficient variable speed pump. Short story, I put a timer on the system. The dig and basic install was really great. They set the pool in the hole 1 time, checked it for proper foundation and was level within .25 inches.. the pool and color looks wonderful.
    12 x 26 Viking FG IG, Bermuda Model, 3 1/2' to 5', 7000 Gallons, Diamond Series Maya, Hayward 1 1/2 HP Maxflo VS, Hayward Stay Clear Plus Cart Filter C17502(S), Hayward Aqua Rite SWG w/T3 cell, Color Changing FIBERSTAR Lighting, Aqua Bot Supreme Robotic cleaner, Brushed Concrete with CCI Liberty Tan color, Taylor K-2006 test kit, Armor Foundation penetrating concrete sealer(lifetime warranty).

  15. Back To Top    #15

    Join Date
    Jul 2013
    Location
    Waxahachie, Tx.
    Posts
    389

    Re: viking fiberglass pool

    Pool looks beautiful. Have added a timer since last post. Don't care what on said it's crazy to run pump 24/7. No issues at all.

    Sent from my KFTT using Tapatalk
    12 x 26 Viking FG IG, Bermuda Model, 3 1/2' to 5', 7000 Gallons, Diamond Series Maya, Hayward 1 1/2 HP Maxflo VS, Hayward Stay Clear Plus Cart Filter C17502(S), Hayward Aqua Rite SWG w/T3 cell, Color Changing FIBERSTAR Lighting, Aqua Bot Supreme Robotic cleaner, Brushed Concrete with CCI Liberty Tan color, Taylor K-2006 test kit, Armor Foundation penetrating concrete sealer(lifetime warranty).

  16. Back To Top    #16

    Join Date
    Apr 2012
    Location
    Southeast Louisiana
    Posts
    174

    Re: viking fiberglass pool

    Your VS pump didn't have a timer function built-in?
    Slidell, Louisiana (near New Orleans) 11,000gal kidney shaped Trilogy fiberglass pool Intelliflo VS Triton TR100 filter Easytouch 4 w/IC20 SWCG Polaris 280

  17. Back To Top    #17

    Join Date
    Jul 2013
    Location
    Waxahachie, Tx.
    Posts
    389

    Re: viking fiberglass pool

    Yes ...but only a on function . Once its running power has to be interrupted to start the sequence over again. V1 is prime speed. Starts at 3000rpm runs for 4 min then switches to v3 which I have set at 1500rpm. It will run at that v3 speed till power is interrupted.
    Sent from my SPH-L720 using Tapatalk
    12 x 26 Viking FG IG, Bermuda Model, 3 1/2' to 5', 7000 Gallons, Diamond Series Maya, Hayward 1 1/2 HP Maxflo VS, Hayward Stay Clear Plus Cart Filter C17502(S), Hayward Aqua Rite SWG w/T3 cell, Color Changing FIBERSTAR Lighting, Aqua Bot Supreme Robotic cleaner, Brushed Concrete with CCI Liberty Tan color, Taylor K-2006 test kit, Armor Foundation penetrating concrete sealer(lifetime warranty).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •