The CH of the water coming out of the tap here in Mexico is 400. Our cement pool typically has a CH level of 600. However, when the numbers get this high I am a little skeptical of the accuracy. The other numbers are
FC 2
CC 0
PH 7.5 to 7.7
TA 60 to 80
CYA 40
Salt 4000
Is there any way to lower the CH?
Note that the closest pool servicer is 300 miles away in Tucson. However, we do go to AZ sometimes to purchase items.
FC 2
CC 0
PH 7.5 to 7.7
TA 60 to 80
CYA 40
Salt 4000
Is there any way to lower the CH?
Note that the closest pool servicer is 300 miles away in Tucson. However, we do go to AZ sometimes to purchase items.