It should be a back connection ¼" NPT. Just unscrew it and screw the new one in it's place. You can get them at either the pool store or your local big box store (Lowes, etc.) will have them. Just match the range you have now and be sure to use sealant (t-tape or paste) on the threads.
It should be a back connection ¼" NPT. Just unscrew it and screw the new one in it's place. You can get them at either the pool store or your local big box store (Lowes, etc.) will have them. Just match the range you have now and be sure to use sealant (t-tape or paste) on the threads.
If I remove the pressue gauge from the filter, water will start coming out, which I assume is a bad thing. Do I need to turn the handle up top to a certain setting?
Turn the pump off and close the skimmer and return valves. Just like when you clean the pump strainer basket. There will be some water come out but it won't be much.
Turn the pump off and close the skimmer and return valves. Just like when you clean the pump strainer basket. There will be some water come out but it won't be much.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!