1st time pool owner from NJ

Loumacri07

New member
May 26, 2020
1
Cherry Hill
Hi everyone. My name is Lou. I recently inherited an intex 12×24×52 intex. Excited as this is my 1st pool. I dug up the ground and leveled with 3 tons of sand but am a bit stuck. Im trying to figure out the appropriate spacing for the pavers I'm picking up. Im getting 16×16 pavers but I can't seem to find a post that tells me where on center i should place the pavers. Your advice and assistance as to what it is or where to look would be greatly appreciated.
 
I don't have intex. But have the following comments:

Pool should be leveled on undisturbed ground. The pavers should be leveled and then the legs should be set on them.

I hope you did not build up with sand, it will wash out.
 
We used this photo that another poster had used for our 12x24x52 intex xtr...it worked perfectly.
We leveled the pavers with the hard ground.
 

Attachments

  • 36B271F6-8923-4585-9530-D0B349E17577.jpeg
    36B271F6-8923-4585-9530-D0B349E17577.jpeg
    56.2 KB · Views: 0
  • F7D269CF-A927-4C4A-8B0B-FA64FE882997.jpeg
    F7D269CF-A927-4C4A-8B0B-FA64FE882997.jpeg
    315.7 KB · Views: 1
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.