Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Compu-pool SWG keeps popping fuses

  1. Back To Top    #1

    Compu-pool SWG keeps popping fuses

    We just got our Compu-pool installed last week. It ran for less than a day then shut down. After looking around I noticed the fuse had blown. I replaced the fuse and the system fired right back up. It stayed on for about 2 mins then shut off again. I looked and it blew another fuse. I installed a 3rd fuse and the same thing happened. I'm afraid to keep using fuses because I don't want to fry the system. Please HELP!!!!!!

    I must add it is wired for 110 instead of 220, and on its own 30 amp breaker.
    pool size 20,000 gallons
    cartridge filter...Hydromite HM100
    Inground tile surface
    Sta-Rite Dura Glas 3/4 HP single speed pump

    Test results Rainbow Lifegard kit
    CL just under 3.0
    PH 7.8

  2. Back To Top    #2

    Re: Compu-pool SWG keeps popping fuses

    Ok nevermind I found the solution. From another thread I found someone experiencing the same issue with a different brand of SWG. There was some trash in the cell that was shorting two plates together. I removed and cleaned the cell, installed another fuse and its off and running.
    pool size 20,000 gallons
    cartridge filter...Hydromite HM100
    Inground tile surface
    Sta-Rite Dura Glas 3/4 HP single speed pump

    Test results Rainbow Lifegard kit
    CL just under 3.0
    PH 7.8

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •