Hello all, long time lurker, first time poster, finally building a pool.
We just finished the gunite stage and the pool builder has installed the plumbing and equipment.
The pool is 13500 gallons roughly, free form pool with 4 jet spa.
2 inch plumbing, 2 skimmers, inline aquapure 1400 swg.
Filter is Jandy CV 460
max flow 150 gpm
six hour capacity 54000
max working pressure 50 psi
normal startup pressure 6-15 psi
The PB installed
2 hp Jandy FloPro main pump to run 4 pool returns, 4 jet spa, 1 bubbler.
1.5 hp Jandy FloPro pump for 3 ft wide sheer decent, 1 aerator.
1 hp polaris booster pump for polaris 280 cleaner.
I asked about the pump being large, the PB indicated they build pools just like this every day.
They said the equipment is matched and works well. They also indicated the high flow would require less pump on time.
Any advice on if this setup is in the proper range? Thanks so very much.
We just finished the gunite stage and the pool builder has installed the plumbing and equipment.
The pool is 13500 gallons roughly, free form pool with 4 jet spa.
2 inch plumbing, 2 skimmers, inline aquapure 1400 swg.
Filter is Jandy CV 460
max flow 150 gpm
six hour capacity 54000
max working pressure 50 psi
normal startup pressure 6-15 psi
The PB installed
2 hp Jandy FloPro main pump to run 4 pool returns, 4 jet spa, 1 bubbler.
1.5 hp Jandy FloPro pump for 3 ft wide sheer decent, 1 aerator.
1 hp polaris booster pump for polaris 280 cleaner.
I asked about the pump being large, the PB indicated they build pools just like this every day.
They said the equipment is matched and works well. They also indicated the high flow would require less pump on time.
Any advice on if this setup is in the proper range? Thanks so very much.