Live near Tampa Florida. Motor on a Pentair Whisperflo 1.5 HP pool pump went out after 4 1/2 years. The motor itself was very rusty. It is situated directly under the overhang of the roof so rainwater lands on the motor. Pool service company that replaced motor recommended that I install cover over motor to keep out rainwater to extend the life of the new motor. Local pool stores (Pinch-a-Penny & Leslie's) apparently have covers for about $18. Should I install a cover?
With the high temperatures in Florida I'm also concerned about getting adequate air circulation around the motor so that it doesn't overheat.
Thanks in advance for any advice.
With the high temperatures in Florida I'm also concerned about getting adequate air circulation around the motor so that it doesn't overheat.
Thanks in advance for any advice.