- Apr 26, 2009
- 419
Will have the pump tomorrow, also have the 2SP switch for the RS-6 Aqualink coming as well. The on-line jandy doc for this config is poor (non-existent) at best.
Hoping there's a better diagram coming with the pump. Saw this thread http://www.troublefreepool.com/dual-speed-wiring-question-t14547.html?hilit=wiring two speed, and assuming that the wiring is similar.
Another assumption with the Aqualink: The RS-6 will control the pump such that when AUX 0 (F. Pump) is "on", the pump is in "full speed" and when AUX 2 is "on", the pump will be on 1/2 speed - but nothing in the doc confirms this. Currently, AUX 1 controls the cleaner JVA.
If you've done this before, help will be appreciated.
Thanks,
- Jeff
Hoping there's a better diagram coming with the pump. Saw this thread http://www.troublefreepool.com/dual-speed-wiring-question-t14547.html?hilit=wiring two speed, and assuming that the wiring is similar.
Another assumption with the Aqualink: The RS-6 will control the pump such that when AUX 0 (F. Pump) is "on", the pump is in "full speed" and when AUX 2 is "on", the pump will be on 1/2 speed - but nothing in the doc confirms this. Currently, AUX 1 controls the cleaner JVA.
If you've done this before, help will be appreciated.
Thanks,
- Jeff