Current reading:
FC = 15
PH = 7.5
Alk = 80
Salt = 3300
CYA = 70
My FC level has been high since mid October and after adjusting the SWG output knob down several times, I finally turned the switch off. The switch has been off for a week now and the FC reading hasn't changed. I'm using the Taylor kit and my reagents are fresh. The weather is cooler so I know the FC level is not decreasing as much as during the summer heat. However, I would think it should have decreased some in a week. I live in North Florida and while the unit has been off we've experienced a few cloudy and cooler days and nights. My pool is also in a screen enclosure. During the summer, my pump runs 12 hours a day. I've since scaled back to 6 hours/day.
I'm perplexed and have many questions......
Is the SWG is working correctly? Everything seems fine as there are no flashing lights, etc. Could there be a problem with the adjustment knob and it was "overproducing"?
Is it normal that my FC level is not decreasing with the SWG off? Also, can I unplug the power cord to the SWG power box while the unit remains off?
FC = 15
PH = 7.5
Alk = 80
Salt = 3300
CYA = 70
My FC level has been high since mid October and after adjusting the SWG output knob down several times, I finally turned the switch off. The switch has been off for a week now and the FC reading hasn't changed. I'm using the Taylor kit and my reagents are fresh. The weather is cooler so I know the FC level is not decreasing as much as during the summer heat. However, I would think it should have decreased some in a week. I live in North Florida and while the unit has been off we've experienced a few cloudy and cooler days and nights. My pool is also in a screen enclosure. During the summer, my pump runs 12 hours a day. I've since scaled back to 6 hours/day.
I'm perplexed and have many questions......
Is the SWG is working correctly? Everything seems fine as there are no flashing lights, etc. Could there be a problem with the adjustment knob and it was "overproducing"?
Is it normal that my FC level is not decreasing with the SWG off? Also, can I unplug the power cord to the SWG power box while the unit remains off?