Newbie question. When should I be measuring my chlorine levels, after the pump has run all day or in the morning before the pump comes on? Normally I run the pump from 7am-3pm. Most recent numbers are:
FC: 7
CC: 0
pH: 7.6
TA: 100
CH: 350
CYA: 70
I know the chlorine is a bit high but I started adding Borax. After I added 6 boxes I noticed that the chlorine level has been creeping up even though I have been dropping the output of the Jandy Aquapure.
FC: 7
CC: 0
pH: 7.6
TA: 100
CH: 350
CYA: 70
I know the chlorine is a bit high but I started adding Borax. After I added 6 boxes I noticed that the chlorine level has been creeping up even though I have been dropping the output of the Jandy Aquapure.