Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Valve actuators

  1. Back To Top    #1

    Join Date
    Oct 2007
    Location
    Valrico, FL
    Posts
    500

    Valve actuators

    Recently a Goldline valve actuator on my pool started to act up. After some investagation, I discovered that the electric motor inside was bad. The terrible part of this is that Goldline does not sell any replacement parts for their actuators. You have to purchase a complete new actuator.

    I would like to know if anyone knows of any valve actuators for which a complete line of spare parts are available? I hate to throw out a piece of equipment, just because I can't get a simple part.
    7,500 gal, IG pool, L shape 22' x 15', 1.5 hp pump, cartridge filter, AquaPlus SWG/Controller, Pebble-Tec liner.

  2. Back To Top    #2

    Join Date
    Jun 2009
    Location
    Vero Beach, FL
    Posts
    462

    Re: Valve actuators

    Have you taken the motor out and looked for markings / model numbers / brand name/ etc? You can usually google the part and buy a replacement. I'm sure Hayward does not make their own motors. I know Intermatic makes a version of the actuator that sells for less than the other brands if you have to buy new.
    25' x 13' Roman, 12000 gal IGP, Plaster, with 500 gal Spa
    SWG, 1 HP Max Flo Pump, C-900 cartridge filter
    Solar heat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •