I finally found one but it did not work. The way my return eyeball is designed,the eyeball does not screw out, it is held in by the ring that screws into the port. So you cannot use the tool with eyeball in place,so what i bought is useless.
Is there a tool that would work for this situation,or can I retrofit my returns with new eyeballs?The only way I could get them out is to use a hammer and pound a screwdriver to the rings,some of the plastic around the ring gets damaged and sooner or later I will need new ones.
Is there a tool that would work for this situation,or can I retrofit my returns with new eyeballs?The only way I could get them out is to use a hammer and pound a screwdriver to the rings,some of the plastic around the ring gets damaged and sooner or later I will need new ones.