Hey, first post (new pool). I've got an Aqua Logic PS-8 and a Sta-Rite SR400NA heater. I'd like to control the temp with the thermostat setting in the AL menus, but the heater itself has its own thermostat setting on its control pad. They seem to conflict with one another. If I turn the heater thermostat all the way up, will this allow the AL to be in control?
BTW, the AL is connected to the heater with the 2-wire config using the Fireman's Switch.
Thanks,
Phillip
BTW, the AL is connected to the heater with the 2-wire config using the Fireman's Switch.
Thanks,
Phillip