I thought I would start a new thread with this mess.
Put in the pool...turn power on..blue lite for large pool.Bot starts on its journey...runs a few minutes the stops...lites on power supply start blinking.Here are the steps I've taken.
1.Took bot out of pool,took baskets out...cleaned completely.Back in pool....same results.Runs a minute or so...shuts down...lites blink
2.After research,I remove the drive motor to make sure it's not wrapped in string or hair.Nothing there.Ran it dry for a few minutes...works fine...reverses like it should.Didnt want to run it long out of pool so I turned it back off.Lites never blinked during this test.Sorta tells me the drive motor is fine.
3.Took supply apart...can't tell anything.All solid state,resisters,relays an such.I read about the timer on these...older models I guess about bypassing the timer.I'm thinking thats the problem....but how can this be tested?
I live in New Braunfels,Tx.....no dealer around here for these.
Any help would be much appreciated.
Put in the pool...turn power on..blue lite for large pool.Bot starts on its journey...runs a few minutes the stops...lites on power supply start blinking.Here are the steps I've taken.
1.Took bot out of pool,took baskets out...cleaned completely.Back in pool....same results.Runs a minute or so...shuts down...lites blink
2.After research,I remove the drive motor to make sure it's not wrapped in string or hair.Nothing there.Ran it dry for a few minutes...works fine...reverses like it should.Didnt want to run it long out of pool so I turned it back off.Lites never blinked during this test.Sorta tells me the drive motor is fine.
3.Took supply apart...can't tell anything.All solid state,resisters,relays an such.I read about the timer on these...older models I guess about bypassing the timer.I'm thinking thats the problem....but how can this be tested?
I live in New Braunfels,Tx.....no dealer around here for these.
Any help would be much appreciated.