My Spa Jets are too strong. The Jets are on a separate path than the pool/spa filter system. The SPA Jet system has an air blower with a 3 way relief valve to control the amount of air injected.
The pump is a Jandy FloPro rated at 1.5 HP with a Century Centurion Motor, single speed, 3450 RPM.
What are some solutions to lessen the Spa Jet water flow (without buying a new pump)?
Some ideas:
+ using two 3 way valves, one on the pump input and one on the pump output, feed back some of the water?
+ are there kits to make the one speed pump into a 2 speed pump or a kit to lower the RPM?
Please comment on these ideas and add some of your own.
Thanks
The pump is a Jandy FloPro rated at 1.5 HP with a Century Centurion Motor, single speed, 3450 RPM.
What are some solutions to lessen the Spa Jet water flow (without buying a new pump)?
Some ideas:
+ using two 3 way valves, one on the pump input and one on the pump output, feed back some of the water?
+ are there kits to make the one speed pump into a 2 speed pump or a kit to lower the RPM?
Please comment on these ideas and add some of your own.
Thanks