I've got a total of three Hayward Colorlogic lights in my pool - Two in the pool itself and one in the spa. I noticed last night that the two lights in the pool did not come on (via the nightly timer) but the spa light did as normal. Tried the following to troubleshoot:
As far as lights go, I've got for Pentair laminars, two Pentair bubblers, and the three Hayward Colorlogic lights I already mentioned. All lights are working normal except for the two Colorlogic in the pool.
Any suggestions and guidance in what to check next would be appreciated.
- Turned my Hayward Ominlogic System on and off;
- Check the fuses for everything, including the light and they had not tripped;
- Went ahead and reset the fuses in the breaker box;
- Tried the sync light function;
- Opened the six Intermatic (Model PX300) boxes on the wall but those are beyond my skill level (the outside says "if overloaded internal protector will open. Automatic reset may take 15 minutes. To correct fault, remove short or overload. No user serviceable parts inside." Should I be able to see some "internal protector" opened inside that box?;
- Hayward documentation trouble-shooting says "check input power to transformer and then light. Check ground fault and reset if necessary." Is this referring to inside the Intermatic boxes?
As far as lights go, I've got for Pentair laminars, two Pentair bubblers, and the three Hayward Colorlogic lights I already mentioned. All lights are working normal except for the two Colorlogic in the pool.
Any suggestions and guidance in what to check next would be appreciated.