Hello all. We purchased a home in Feb of 2015. We knew the pool needed some help since some tiles had popped off and other issues. However, the Summer of 2017 is when the pool gave up. The steps began to crumble, the plaster was coming off in chunks, the coping joints were crumbling, the expansion joint was not water proof long ago....just a mess. So, our kitchen remodel was pushed back so we could take care of the pool.
The pool is a 20k gallon Anthony pool. I have already replaced the light with a new LED (guy installed it sideways) and I bought a new gas heater. Since the pool is 40+ years old, there were some required improvements to bring it to code. We had to have a new drain system added so the overall depth of the pool is about 10 inches less than before. Here are some before shots and the initial draining.
The pool is a 20k gallon Anthony pool. I have already replaced the light with a new LED (guy installed it sideways) and I bought a new gas heater. Since the pool is 40+ years old, there were some required improvements to bring it to code. We had to have a new drain system added so the overall depth of the pool is about 10 inches less than before. Here are some before shots and the initial draining.