Replaced Aquarite board and now...

[RASelkirk]

I'm getting this hinky display. Shows 3.0 instead of 3000, but my temps are in F° not C°. If I toggle the units between US/Metric, the salt level stays decimal. It's a rebuilt board, I can live with it until this board goes out but it would be nice to have it "right"...

The one I replaced has no bad spots, the display worked fine but no LEDs on the vertical panel.

Any ideas?

Russ

 

[ping]

Most likely the old board needs a new current limiter for a few bucks. There are many threads on the subject, do a search on how to replace it.

 

[RASelkirk]

Most likely the old board needs a new current limiter for a few bucks. There are many threads on the subject, do a search on how to replace it.

I've got all that info, thanks. I'm snakebit when it comes to something breaking, it never breaks like it's supposed to!

Russ

 

[RASelkirk]

Bought new mainboard and display board, tried the display first and got a nice bight display still with the metric salt and US temp. So, the mainboard is causing the metric-US switching issue. Put in the new mainboard and all is good! Now I have a spare display (albeit dim), a spare working mainboard that shows hinky salt readings, and another mainboard to repair...

Russ