The only thing that I disconnected from the board was a three prong set of wires that ran back to the temperature sensor. Most wires I just disconnected and reconnected them right back to test for secure connection. The blue/white wires on the water pressure switch may have gotten reversed (had to stop and come back), but based on the bend in the wires, I think I got it right. Even tried changing them with no luck. The blue is the closet to the front panel with the white behind it (if you can picture looking at the switch). That is all. I get no lights at all on the front panel. If a picture of everything would help, I'll be glad to post one (or a video). Thanks again for talking me through this stuff. Spishex, you are a great help to me and everyone else.