Hello,
I recently installed an Intex 9x18x52 rectangular pool, and I did some research on what type of support to use under the 12 legs...I seen several people saying to use 12x12 pavers. So, I went to lowes, picked up 12 of them and began filling the pool up. I filled the pool up overnight and when I checked it out the next morning, 7 out of the 12 pavers cracked. so, now, of course, the pool is very much out of level, about 3.5-4 inches!
Can someone please give me a definite answer as to what I should be using under the legs? if you you have a picture/link of what should be used, that would be even better. I already have to drain the pool to get these old pavers out, I do not want to put a new set of pavers/wood down and they just end up cracking as well.
Thank you!
I recently installed an Intex 9x18x52 rectangular pool, and I did some research on what type of support to use under the 12 legs...I seen several people saying to use 12x12 pavers. So, I went to lowes, picked up 12 of them and began filling the pool up. I filled the pool up overnight and when I checked it out the next morning, 7 out of the 12 pavers cracked. so, now, of course, the pool is very much out of level, about 3.5-4 inches!
Can someone please give me a definite answer as to what I should be using under the legs? if you you have a picture/link of what should be used, that would be even better. I already have to drain the pool to get these old pavers out, I do not want to put a new set of pavers/wood down and they just end up cracking as well.
Thank you!