I read the sticky about adding borates about 4-5 times, printed it out and I'm ready to add them. However, I read in the thread that the TA should be around 70-90 and mine is a little higher. I guess I just want to double check that I need to adjust the numbers some before I start adding borates.
Here's what I've got this morning:
FC- 4
CC- 0
pH- 7.4
TA- 110
CYA- 40
From what I understand about the sticky thread, I should lower the TA to say 80ish with a bit of acid first then aerate the pH back up to the 7.4-7.6 range before adding the borates.
Thoughts?
Here's what I've got this morning:
FC- 4
CC- 0
pH- 7.4
TA- 110
CYA- 40
From what I understand about the sticky thread, I should lower the TA to say 80ish with a bit of acid first then aerate the pH back up to the 7.4-7.6 range before adding the borates.
Thoughts?