I have a Hayward AquaRite system with a T-15 cell. In starting up my pool this year I noticed that my cell is never generating when I randomly check it. I am currently letting the system run 24/7 until I get the pool cleared up. My salt water level is at 3000 and my pool temp is 67 degrees. I can turn the switch to off and then back on and the unit will start generating. Voltage goes to around 25 volts and current to around 4.8. It will generate fine for one 120 minute cycle, then it will stop generating and never start back until I manually turn the switch off and back to auto. Then it will generate for another 120 minutes, kick off and never come back on. Below is the exact diagnostics taken while the unit is generating
3300
67
25.4
4.87
96P
3000
al-0
r1.40
I have tried various settings for the percentage, including 100%, but the system does the same everytime.
3300
67
25.4
4.87
96P
3000
al-0
r1.40
I have tried various settings for the percentage, including 100%, but the system does the same everytime.