Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 12 of 12

Thread: Easytouch kit selection?

  1. Back To Top    #1

    Join Date
    Jun 2016
    Location
    Ontario, Canada
    Posts
    25

    Easytouch kit selection?

    I'm trying to figure out what would be the best kit to purchase and I'm getting somewhat confused between the different choices. Here are the items that I plan to get.

    Easytouch (I don't need more than 4 relays. No spa)
    IC60
    Screenlogic wireless.

    I'm trying to find a kit that suits what I need for the best price. Where I'm getting confused is some kits include SL, some don't. Some have load center, some don't. Some include the SWG transformer, some don't.
    Which way should I go?
    Thanks
    Lagoon 42x31x20 steel vinyl 25000gal, Easytouch 4, IC60, Intelliflo 2VST, FlowVis meter, CC520, 480sqf Aquatherm Solar collectors, Dolphin A20 cleaner.

  2. Back To Top    #2
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Easytouch kit selection?

    There should be an Easytouch/IC60 bundle that is usually the best deal. It will have the SWG transformer built in. You probably don't need a load center since this a retrofit. A load center is used as a pool breaker subpanel and pool automation all in one.

    Another option might be a Suntouch.
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

  3. Back To Top    #3

    In the Industry
    Pool Clown's Avatar
    Join Date
    Sep 2008
    Location
    Silicon Valley, CA
    Posts
    1,764

    Re: Easytouch kit selection?

    There is the E/T, and there is the E/T PL4. Depending on how old your existing system is, you will either have a sub-panel at the equipment, or you won't. If you do have a S/P, and you wish to "clean up" the control system area, an E/T with the sub panel integrated into it would be the choice (520593). Of course this choice will cost more as you will need to have the breakers and wiring switched over. That particular E/T also has more features, including the integration of the iC40 so would naturally cost more than the E/T PL4 (522352) Which is not available with the iC40 integrated into it, but the power center (520556) and cell (520555), can be purchased separately and controlled through the PL4, or, can stand alone.

    I would not recommend the SunTouch. The user interface is very frustrating and unfriendly to most. Unless you are interfacing with it on a regular basis, you will lose the "hang of it" easily. This is not only my opinion, but customer feedback as well.
    Factory Warranty Station for:
    Jandy/Zodiac, Pentair, Sta-Rite, Raypak (Rheem, Rudd), Polaris,
    and Paramount pool cleaning systems.

  4. Back To Top    #4
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Easytouch kit selection?

    I agree that the user interface on the Suntouch and Solartouch isn't all that intuitive. It took me a couple of years of programming (infrequently) with the manual in hand before I recalled enough about how it works to be able to program without the manual now.
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

  5. Back To Top    #5

    Join Date
    Jun 2016
    Location
    Ontario, Canada
    Posts
    25

    Re: Easytouch kit selection?

    Thanks for the replies! This is a new build so the load center would be nice. There is a kit that includes the IC60 but it's the 8 relay version and includes 2 actuators that I don't need. The descriptions of the kits makes it hard to determine if load center and SWG transformer are included.

  6. Back To Top    #6
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Easytouch kit selection?

    If it includes the IC60 then the transformer will be included. Agreed, for new construction the load center is the way to go. Since you're in Canada I'm not sure the best place to shop. Inyo Pools and Sunplay are my fave online pool stores stateside. And they will be happy to help you get it configured the best way. As you've seen the possibilities are endless.
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

  7. Back To Top    #7

    In the Industry
    Pool Clown's Avatar
    Join Date
    Sep 2008
    Location
    Silicon Valley, CA
    Posts
    1,764

    Re: Easytouch kit selection?

    Unless your pool will be in excess of 40,000 gal., i see no need to go with the iC60. The iC40 should work just fine. If you insist on the iC60, get the 520591, and external iC60 (520556 power center and 521105 iC60 cell), or get the 520593, and see if Pentair will substitute with higher capacity cell with price adjustment. With the E/T P/S8 with iC60 bundled, You will have to pay more, and with options you won't or can't use, just to get an iC60 bundle, that will make it cost in-effective.

    Screen logic bundles ONLY with the PL series EasyTouch (No load center). And it is not an "integration" anyway there will be a transmitter mounted externally from the load center either way, that is if you don't use a hard wire from equipment to the home network.

    Screen logic needed: 522104
    Factory Warranty Station for:
    Jandy/Zodiac, Pentair, Sta-Rite, Raypak (Rheem, Rudd), Polaris,
    and Paramount pool cleaning systems.

  8. Back To Top    #8

    In the Industry
    Pool Clown's Avatar
    Join Date
    Sep 2008
    Location
    Silicon Valley, CA
    Posts
    1,764

    Re: Easytouch kit selection?

    Sorry all numbers i gave you are for US only...

    Canada numbers are:
    520914 E/T 4 Single Body (salt ready system, cell must be ordered separately).
    NO Canada number for iC60 cell. This may take care of that iC40 vs 60 request.
    Factory Warranty Station for:
    Jandy/Zodiac, Pentair, Sta-Rite, Raypak (Rheem, Rudd), Polaris,
    and Paramount pool cleaning systems.

  9. Back To Top    #9

    Join Date
    Jun 2016
    Location
    Ontario, Canada
    Posts
    25

    Re: Easytouch kit selection?

    Quote Originally Posted by Pool Clown View Post
    Unless your pool will be in excess of 40,000 gal., i see no need to go with the iC60. The iC40 should work just fine. If you insist on the iC60, get the 520591, and external iC60 (520556 power center and 521105 iC60 cell), or get the 520593, and see if Pentair will substitute with higher capacity cell with price adjustment. With the E/T P/S8 with iC60 bundled, You will have to pay more, and with options you won't or can't use, just to get an iC60 bundle, that will make it cost in-effective.

    Screen logic bundles ONLY with the PL series EasyTouch (No load center). And it is not an "integration" anyway there will be a transmitter mounted externally from the load center either way, that is if you don't use a hard wire to the home network.

    Screen logic needed: 522104
    Thanks! My pool will be around 37000 gal. Everything I've read says to get one size larger than you need. I'm at the limit of the IC40. I'll try find some local pricing.
    Lagoon 42x31x20 steel vinyl 25000gal, Easytouch 4, IC60, Intelliflo 2VST, FlowVis meter, CC520, 480sqf Aquatherm Solar collectors, Dolphin A20 cleaner.

  10. Back To Top    #10
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Easytouch kit selection?

    Yes, definitely get the IC60
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

  11. Back To Top    #11

    Re: Easytouch kit selection?

    I'm looking to do Screenlogic and am in Canada. My dealer wants $900 for it. Looking for a good site that will ship to Canada cause I figure it shouldn't cost me more than $500 CDN. Prices here in Canada are crazy

  12. Back To Top    #12
    Mod Squad pooldv's Avatar
    Join Date
    Aug 2012
    Location
    DFW, TX
    Posts
    24,974

    Re: Easytouch kit selection?

    My two favorite pool stores are Sunplay and INYO Pools. I don't know if they ship to CAN.
    TFP Moderator
    If TFP helped you or saved you money - Become a TFP Supporter! <--Click here
    2012 build and pics, 20k gal gunite, black onyx pebblesheen, OK flagstone, IntellifoVS, cart filter w/Pleatco, IC40 SWG, Solartouch, 5 12'x4' solar panels, HP50HA heat pump, 8mil solar cover, borates, TF-100 test kit, SONOS, Doheny's Discovery Robot, hot tub on bleach

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •