- Sep 26, 2016
- 225
- Pool Size
- 11000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
Last test results as of yesterday 3/13/17:
FC 8
PH 7.5
TA 70
CH 375
CYA was 30 - Sunday I added 1 quart CYA into skimmer to move up to 60+
TEMP 51
SALT 3200
My CSI was a little off with these numbers however if the temp was higher the CSI would be in range.
BORATES PLAN: I am going to reduce TA (~50) a little and add borates, I purchased 25 lbs Boric Acid and was double checking if this is ok being 6 month post fill?
With Ph around 7.5 PoolMath says to add 11oz MA to get to 7.2 and 22oz to get to 7.0. What should I shoot for? And should I then (half hour or so after adding MA) just spread Borate granules across the deep end and begin brushing until dissolved?
Thanks in advance. Jeremy
FC 8
PH 7.5
TA 70
CH 375
CYA was 30 - Sunday I added 1 quart CYA into skimmer to move up to 60+
TEMP 51
SALT 3200
My CSI was a little off with these numbers however if the temp was higher the CSI would be in range.
BORATES PLAN: I am going to reduce TA (~50) a little and add borates, I purchased 25 lbs Boric Acid and was double checking if this is ok being 6 month post fill?
With Ph around 7.5 PoolMath says to add 11oz MA to get to 7.2 and 22oz to get to 7.0. What should I shoot for? And should I then (half hour or so after adding MA) just spread Borate granules across the deep end and begin brushing until dissolved?
Thanks in advance. Jeremy