- Jun 1, 2011
- 203
- Pool Size
- 10000
- Surface
- Vinyl
- Chlorine
- Liquid Chlorine
I had a Power Flo LX 1.5 hp blow off the flex PVC last year and flooded the motor. After a few days it started and finished out the season but very noisy to the point where I think it annoys the neighbors. I have a Hayward Dream line S190TSCP sand filter that takes 175 lbs of sand and a design flow rate of 45GPM. I have Zeo Sand and Pea Pebbles with no issues. The Dreamline was a private label brand Hayward did for pool stores.
I cannot find specs about gpm and amps, but was looking to replace my pump for a new one and have some questions.
My pump is about 3 feet from the pool and PVC'd in with the exception of the flex PVC, before I did PVC I blew out several hoses maybe due to pressure and I think I have back pressure due to aqualiminator light.
Is the 1.5 too big for the filter, I don't know how to read the flow rates.
I was considering a PowerFlo Matrix and that is where my questions are mostly.
The Matrix looks about the same size as my LX so I think I could swap it right in without having to redo my pipes other than the union.
Would a 2 speed matrix be a good option? I don't know how much it saves and how to switch it. One concern is I have not seen any 2 speeds with Twist Lock Plugs. I have to have twist lock to be compliant plus that is how my timer is wired.
If I do go with a matrix would 1.5 be good or should I go down to 1?
Then there is pentair optiflo, I have not priced them but was looking, I could repipe that side if need be pretty easily. My pool is open April- Late Sept and I run my filter about 6 hours a day with no issues.
Other option I considered was just upgrade to a cartridge or DE but I have had no issues so far.
Thanks
I cannot find specs about gpm and amps, but was looking to replace my pump for a new one and have some questions.
My pump is about 3 feet from the pool and PVC'd in with the exception of the flex PVC, before I did PVC I blew out several hoses maybe due to pressure and I think I have back pressure due to aqualiminator light.
Is the 1.5 too big for the filter, I don't know how to read the flow rates.
I was considering a PowerFlo Matrix and that is where my questions are mostly.
The Matrix looks about the same size as my LX so I think I could swap it right in without having to redo my pipes other than the union.
Would a 2 speed matrix be a good option? I don't know how much it saves and how to switch it. One concern is I have not seen any 2 speeds with Twist Lock Plugs. I have to have twist lock to be compliant plus that is how my timer is wired.
If I do go with a matrix would 1.5 be good or should I go down to 1?
Then there is pentair optiflo, I have not priced them but was looking, I could repipe that side if need be pretty easily. My pool is open April- Late Sept and I run my filter about 6 hours a day with no issues.
Other option I considered was just upgrade to a cartridge or DE but I have had no issues so far.
Thanks