I've seen several photos of Easytouch load centers in the forum with nice black labels next to the breakers to identify lights, heater, pump, etc. I wrongly assumed that these were included with the Easytouch system. Would someone please share where you've sourced these labels? Thanks!
Easytouch Breaker Labels?
- Thread starter Flybriz
- Start date
Fly,
I used a standard P-Touch label maker.. It works ok, but I was not all that impressed. Of course it could have been just operator error...
Jim R.
I used a standard P-Touch label maker.. It works ok, but I was not all that impressed. Of course it could have been just operator error...
Jim R.
- May 23, 2015
- 24,455
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You can find actual Pentair labels on Amazon but they're overpriced. If you have a P-Touch label maker, Brother sells tape for those that is "outdoor" compatible and will last a bit longer than their regular labels.
Most people use Sharpie markers, not elegant but way cheaper than the alternatives.
Sent from my iPhone using Tapatalk
Most people use Sharpie markers, not elegant but way cheaper than the alternatives.
Sent from my iPhone using Tapatalk
Thank you both! I have a Brother P-Touch at work. I'll give the black tape/white print a try. No way am I paying $90 for labels!