Raypak VS Pump

It has a very basic 24 hour timer. No clock. So you turn it on and the 24 hour clock starts. You can run it on a high speed for x hours, then a lower speed for x hours and then off for the rest of the 24 hours. If the power goes out or the time clock turns it off the new 24 hours cycle restarts when the power is turned on or the time clock turns on again. Can't program 1200 rpm at 8a and 2000 rpm at noon and back to 1200 at 2p and then have solar override to 2200 rpm and return to 1200 rpm when solar is off and then the pump stops at 9p.
 
Isn't that the same way the Pentair SuperFlo VS pumps work? Each time they come on, they run a pre scheduled program.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.