gworel- per the pm you sent me- here are the pictures on my goldline unit. I hope these help.
"I am using some older Compool valve actuators which are missing the original red connectors. I found the connectors but I do not know the order in which to connect the wires.
In your picture, the connector from the valve actuator is shown with the wires visible. The wires from the actuator are red, white, and black. If you could post a close-up photo of the actuator connector as it is plugged into your controller, it should give me the information I need to know.
Alternately, if you could tell me the order of the wires relative to the connector. The connector is keyed so it can only be plugged in one way. The sockets on my controller are vertical with the keyed slots on the right. Your controller looks to have the sockets horizontal but I cannot see which side is keyed or the order of the wires. If you could tell me for example, the keyed slots are on the bottom and the wires are oriented, black, white, red, left to right. Then that would be all I would need to know."
These are looking at the panel straight on (first picture)
and up from below (sort of- best I could get my camera in without hitting anything sensitive) (second picture).