- Oct 23, 2008
- 90
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I will be installing a Goldline Sense & Dispense system and using a Stenner 5 gpd variable speed pump with a #1 tube. I am using a SWG with a Goldline PS-P8 controller. I have the following questions regarding this setup.
1. Is diluting the acid with water necessary or is it just to avoid fumes when opening the cap on the storage tank?
2. Can I inject acid just before the SWG cell to be able to clean the cell when injection is called for?
3. Do I set the variable speed control on the pump to #10 to get the full 5 gpd and then let the Goldline controller determine the correct amount to inject or should I use a lower number on the pump?
Thanx for your help...
1. Is diluting the acid with water necessary or is it just to avoid fumes when opening the cap on the storage tank?
2. Can I inject acid just before the SWG cell to be able to clean the cell when injection is called for?
3. Do I set the variable speed control on the pump to #10 to get the full 5 gpd and then let the Goldline controller determine the correct amount to inject or should I use a lower number on the pump?
Thanx for your help...