Hi,
Using tfp in spa for now over 2 years and works like a charme. Using stenner like pump to inject liquid chlorine during filter cycle.
I noticed suddenly that the poolpal app that i use for recording values is suddenly showing weird numerbs for CSI and LSI.
With:
Temp 102.2 F
FC 5.5
CC 05
PH 7.6
TA 50
CH 150
CYA 30
Borates 50
Poolpal gives me a CSI of -0,85 and a LSI of -0,84 and warn's with corrosive
Poolmath calculates a CSI of -0.42, no clue what the LSI is.
I guess that since the spa is kind of fiberglass this would not be a problem but would like an expert opinion on this.
(BTW poolpal was calculation correctly on android pre 6.0.1)
Thanks in advance,
Edwin
Using tfp in spa for now over 2 years and works like a charme. Using stenner like pump to inject liquid chlorine during filter cycle.
I noticed suddenly that the poolpal app that i use for recording values is suddenly showing weird numerbs for CSI and LSI.
With:
Temp 102.2 F
FC 5.5
CC 05
PH 7.6
TA 50
CH 150
CYA 30
Borates 50
Poolpal gives me a CSI of -0,85 and a LSI of -0,84 and warn's with corrosive
Poolmath calculates a CSI of -0.42, no clue what the LSI is.
I guess that since the spa is kind of fiberglass this would not be a problem but would like an expert opinion on this.
(BTW poolpal was calculation correctly on android pre 6.0.1)
Thanks in advance,
Edwin