Greetings,
I have iAquaLink setup on my pool with a ePump and a 400k heater. Now that it's cooling off, how do I go about setting the main pump to be at a specific speed when the heater is on? The installer set something up similar for the cleaner, but I'm not sure how he did it. IIRC it is somehow related to a empty Aux, but it's not clear to me.
Currently working: Nothing going on, main ePump at low speed (between 1250 and 1750, depending on how I feel that week...set via Schedule)
Currently working: Cleaner turns on and main pump goes to 2750, returns to low speed (above) when done.
Want: Heater on, main pump to 2500-3000 while heating, back to low speed when off (above).
Any ideas? I've been manually setting the pump speed when I turn the "Set Temp" on during the summer...but I want something a bit more automated for the fall (and to protect the heater...i don't want to have the speed to low and possibly damage the heater core due to not enough flow)
I have iAquaLink setup on my pool with a ePump and a 400k heater. Now that it's cooling off, how do I go about setting the main pump to be at a specific speed when the heater is on? The installer set something up similar for the cleaner, but I'm not sure how he did it. IIRC it is somehow related to a empty Aux, but it's not clear to me.
Currently working: Nothing going on, main ePump at low speed (between 1250 and 1750, depending on how I feel that week...set via Schedule)
Currently working: Cleaner turns on and main pump goes to 2750, returns to low speed (above) when done.
Want: Heater on, main pump to 2500-3000 while heating, back to low speed when off (above).
Any ideas? I've been manually setting the pump speed when I turn the "Set Temp" on during the summer...but I want something a bit more automated for the fall (and to protect the heater...i don't want to have the speed to low and possibly damage the heater core due to not enough flow)