Hi! We recently replaced our 10-year-old Intelliflo Model #011013 (VS 3050) with an Intelliflo Model #011018. We did the install ourselves (used the existing power and communication cable from the old pump). But our Intellitouch is not turning the pump on when the pool is scheduled to come on. I have to go out to the pump and manually turn it on. But when the pool is scheduled to turn off, it will turn the pump off. It almost seems as if I missed a setting somewhere. On the pump, I did set the pump address to #1, as explained in the pump manual. It does seem like the Intellitouch and pump are somehow communicating because on the indoor controller panel, if I go to the Intelliflo menu and click on status, it will show the current speed and watts (but not the gpm). I've been trying for 2 days to figure it out, but I'm a bit stumped. Any help would be appreciated. Thanks!