- Jan 21, 2009
- 562
- Pool Size
- 21000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
I asked this before, but situation is a little different.
Pool has 2 main drains, 3 returns, and 1 skimmer. 1 of the 3 returns is for the pressure cleaner.
That would be the one in the middle on the left. Skimmer is directly across from it. 1 return in the deep ind and one in the shallow end to the right of the steps.
I see alot of 1.5" PVC in the yard along with some 2". I asked for 2" throughout.
Should I run 2" on both sides or 2" on suction side and 1.5" on pressure side????
Which senario will my pump like best
Thanks
BTW The equipment pad will be 6" off of the deep end. Kinda where the Bobcat is.
Pool has 2 main drains, 3 returns, and 1 skimmer. 1 of the 3 returns is for the pressure cleaner.
That would be the one in the middle on the left. Skimmer is directly across from it. 1 return in the deep ind and one in the shallow end to the right of the steps.
I see alot of 1.5" PVC in the yard along with some 2". I asked for 2" throughout.
Should I run 2" on both sides or 2" on suction side and 1.5" on pressure side????
Which senario will my pump like best
Thanks
BTW The equipment pad will be 6" off of the deep end. Kinda where the Bobcat is.