- Aug 11, 2016
- 12
- Pool Size
- 13000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-30
Not sure if this is the correct forum for this thread, please let me know and I can move it to the appropriate one. Here is my situation. The electricians are going to hook up my Easy Touch 8 this afternoon with the equipment listed below. I would like to be able to control the 3 x Intelibrite 5G Color LED's independently from the Glowbrite LEDs. I have two 300 w transformers. Do I have to use both or can all lights be connected to the one transformer, but still be controlled independently? Or do I hook up the 5Gs to one and the Glowbrites to the other? How would I wire this setup into the Easy Touch 8?
IntelliFlo VS Pump 011018
Clean and Clear Plus 420 Cartridge Filter 160301
EasyTouch Control System with the IC40
Screenlogic interface and wireless connection kit 522104
Mastertemp 250,000 BTU Heater 460732
IntelliValve Pool & Spa Valve Actuators 521485
3 - Deck jets
2 - Pentair Colorvision bubblers with Glowbrite LED lights for on the tanning ledge.
3 - Pentair Intellibrite 5G color LEDs
Thank you for you help!!
IntelliFlo VS Pump 011018
Clean and Clear Plus 420 Cartridge Filter 160301
EasyTouch Control System with the IC40
Screenlogic interface and wireless connection kit 522104
Mastertemp 250,000 BTU Heater 460732
IntelliValve Pool & Spa Valve Actuators 521485
3 - Deck jets
2 - Pentair Colorvision bubblers with Glowbrite LED lights for on the tanning ledge.
3 - Pentair Intellibrite 5G color LEDs
Thank you for you help!!