Hi everyone,
After a few weeks of a sparkling pool we had some heavy rains over the last few days which resulted in the water turning slightly hazy and a decent amount of sand in the bottom of the pool.
I vacuumed the floor yesterday and the sand has returned. How do I improve the performance of my filter (if it appears to be the same sand).
Also, I tested the FC level yesterday which was low and I added bleach.
Today these are the readings:
FC=7 (I wanted it to be 5 but the SWG must have generated 2 more)
pH = 7
AL = 110
Ive purchased some Borax to add to raise the pH but wanted your guidance on all the above so I can do things the right way to get back to a sparkly pool.
Thanks,
T
After a few weeks of a sparkling pool we had some heavy rains over the last few days which resulted in the water turning slightly hazy and a decent amount of sand in the bottom of the pool.
I vacuumed the floor yesterday and the sand has returned. How do I improve the performance of my filter (if it appears to be the same sand).
Also, I tested the FC level yesterday which was low and I added bleach.
Today these are the readings:
FC=7 (I wanted it to be 5 but the SWG must have generated 2 more)
pH = 7
AL = 110
Ive purchased some Borax to add to raise the pH but wanted your guidance on all the above so I can do things the right way to get back to a sparkly pool.
Thanks,
T