PB had been maintaining the pool, I've been at the wheel for past couple of weeks. Read through the Pool School articles and read through the various forums, I hopefully can navigate the maintenance without major issues. I have a question though as it comes to Chlorine / CYA Chart. I have a quartz pool with SWG and is in a screen enclosure. I'm trying to understand what the target CYA I should be using. From the chart I see that indoor pools have a lower CYA target. I know that the screen enclosure is not the same as indoor, but I do know that the screen will lower the exposure to the sun. So, with that in mind, what would be a good target CYA I should use?
Results from my last pool test:
FC - 5.6
CC - 0.0
PH - 7.5
TA - 80
CH - 250
CYA - 60
With the new pool I've been adding a little hydrochloric acid every 3-4 days to keep the PH in check as it seems to want to creep up due to new plaster along with descents/bubbler. Other than I haven't added anything additional as it seems to be holding all other levels week to week. If anyone has suggestions I'm all ears.
Thanks
Results from my last pool test:
FC - 5.6
CC - 0.0
PH - 7.5
TA - 80
CH - 250
CYA - 60
With the new pool I've been adding a little hydrochloric acid every 3-4 days to keep the PH in check as it seems to want to creep up due to new plaster along with descents/bubbler. Other than I haven't added anything additional as it seems to be holding all other levels week to week. If anyone has suggestions I'm all ears.
Thanks