Hello all ,
So I went on a 5 day vacation and;
There were quite a few leaves on bottom
All of the seams and wrinkles had collected dirt (it's an intex rectangle so it has a seams every 3 ft or so)
And the end with the stairs seamed to have a dirty film (a known low circulation area)
So I checked the numbers
Fc4.5
Cc0
Ta80
Cya 50
Ph 7.8
I ran the salt generator for an extra cycle this afternoon and the fc is at 6.5 with no cc.
I am planning an overnight test for tonight.
I just feel like dirt doesn't just collect.
And I believe from looking at pool math just over a jug of 12.5% will get me to just about slam level. What could it hurt to hit it before it hits me.
Seems to be clear after the vacuum too.
Any thoughts would be appreciated.
Thanks in advance
So I went on a 5 day vacation and;
There were quite a few leaves on bottom
All of the seams and wrinkles had collected dirt (it's an intex rectangle so it has a seams every 3 ft or so)
And the end with the stairs seamed to have a dirty film (a known low circulation area)
So I checked the numbers
Fc4.5
Cc0
Ta80
Cya 50
Ph 7.8
I ran the salt generator for an extra cycle this afternoon and the fc is at 6.5 with no cc.
I am planning an overnight test for tonight.
I just feel like dirt doesn't just collect.
And I believe from looking at pool math just over a jug of 12.5% will get me to just about slam level. What could it hurt to hit it before it hits me.
Seems to be clear after the vacuum too.
Any thoughts would be appreciated.
Thanks in advance