I am in the middle of a backyard renovation. The pool contractor just installed two 5 foot waterfalls in a raised patio wall. He ran a 1.5 inch PVC pipe and then he "T" it and did a loop to both waterfalls for even water distribution.
When we turned them on the water just trickled out of the waterfalls.
He instructed me that this was due to not enough water flow and he told me i needed to install a booster pump dedicated to the waterfall.
He came and installed the booster pump and told me i needed the electrician to hook it up and all should be good. So today i had the electrician hook up the pump and when i started everything up the waterfalls still only trickled out and down the wall.
Am i being pool guyed?
What should i do to get the these two 5 foot waterfalls operating as they are supposed to?
I have two skimmers, no bottom drain, and 2 return jets and 2 step jets that are "T".
When we turned them on the water just trickled out of the waterfalls.
He instructed me that this was due to not enough water flow and he told me i needed to install a booster pump dedicated to the waterfall.
He came and installed the booster pump and told me i needed the electrician to hook it up and all should be good. So today i had the electrician hook up the pump and when i started everything up the waterfalls still only trickled out and down the wall.
Am i being pool guyed?
What should i do to get the these two 5 foot waterfalls operating as they are supposed to?
I have two skimmers, no bottom drain, and 2 return jets and 2 step jets that are "T".