Hi, my new SWG has worked for a year, but now indicates "no flow" light. Its an aquarite/goldline/hayward.
I pulled the sensor. It looks magnetic:
Flow Switch Replacement for Hayward Salt Systems
I pulled the sensor and plugged the opening. I turned the pump on, then hand closed the flow switch and opened it. No change.
Next step is to open the front plate and wiggle the plug. The flow is fine, just changed the filter, the flow to the pool is rapid,
there is only one tube to the pool and it is on it.
Any suggestions before I drop 32 bucks for a new one?
Thanks,
Scott Franco
I pulled the sensor. It looks magnetic:
Flow Switch Replacement for Hayward Salt Systems
I pulled the sensor and plugged the opening. I turned the pump on, then hand closed the flow switch and opened it. No change.
Next step is to open the front plate and wiggle the plug. The flow is fine, just changed the filter, the flow to the pool is rapid,
there is only one tube to the pool and it is on it.
Any suggestions before I drop 32 bucks for a new one?
Thanks,
Scott Franco