Installed 08-01-04, tested the continuity between the three poles and had directional continuity from middle to the outside and continuity between the two outer poles. I could only get continuity from inner to outer one way ( - on one + on the other not the opposite way) continuity between the outer poles. The middle pole is black and shows slight melting of the low voltage cord. Voltage check with the system on and running was 24.2v. the melting occurred after a 24hr boost? I acid wash regularly as needed. I am experiencing low chlorine output, I think I may have figured it out I believe my salt is too low but would like other opinions.
Salt 2700ppm
FC 1.5
PH 7.8 MAINTENANCE IS A STRUGGLE!
CYA 70
HARDNESS 525
ALK 100
Let me have it guys/gals PLEASE
Salt 2700ppm
FC 1.5
PH 7.8 MAINTENANCE IS A STRUGGLE!
CYA 70
HARDNESS 525
ALK 100
Let me have it guys/gals PLEASE