Hi all,
Just had a new AGP installed Friday (24' X 48" 13,500 gallons) and the water topped off late Saturday early Sunday morning and I wanted to start off with BBB but the numbers I'm getting from my test kit (Leslie's / Taylor 81-330) make no sense when plugged into the pool math site...
1- FC
2- TC
2- Br
8- PH
1100- TA
1000- CH
0- CYA
I've ran the tests twice and gotten the same numbers, but the amount of muratic acid the calculator tells me to put in is like 596oz, and says I need to replace 74% of the water. Somethings not right on my end. I don't want to go to the pool store to get my numbers lined out. Any help would be greatly appreciated!
This is water from the hose and at this point is very clear.
Thanks in advance!
Just had a new AGP installed Friday (24' X 48" 13,500 gallons) and the water topped off late Saturday early Sunday morning and I wanted to start off with BBB but the numbers I'm getting from my test kit (Leslie's / Taylor 81-330) make no sense when plugged into the pool math site...
1- FC
2- TC
2- Br
8- PH
1100- TA
1000- CH
0- CYA
I've ran the tests twice and gotten the same numbers, but the amount of muratic acid the calculator tells me to put in is like 596oz, and says I need to replace 74% of the water. Somethings not right on my end. I don't want to go to the pool store to get my numbers lined out. Any help would be greatly appreciated!
This is water from the hose and at this point is very clear.
Thanks in advance!