No power. I ordered a new transformer based on another thread pointing to that guy on ebay selling them.What specifically do s your issue?
Welcome to TFP!
That looks like the back of an Aqualink RS primary power center main board which should be Jandy/Zodiac #8194. To confirm, there should be a part number just to the left under the other board.
If it s non functioning, the is a guy in norcal that repairs them. New replacements are ~350 from jandy and zero warranty unless a professional installes it. The repair guy is $150 and 90 day warranty. I just got mine back from him yesterday.
http://www.bpelectronics.com/
You could probably have that fixed at a local repair shop pretty cheaply if all it needs is to be resoldered and the chips on the board are OK. You could to bridge the fuse holder and verify that the board to works to be sure.
Youd have to bypass the relay by moving the motor side wires and connnecting them to the power in side of the relay so the pump will run whenever the breaker is switched on. I did this on mine while the panel is out being repaired. Takes about 5 mins but you need to make sure everything is deenergized and comfortable,working with electrical wiring.