Hi Folks! I'm new to TFP and really hoping you guys can help. I have a new saltwater pool pump system (Intex) after our old one died. When I set it up (inlet hose letting water into the pump first, and then releasing the outlet hose; not sure if I'm using the right lingo... anyway..) I made sure that the air was out of the system, and I turned it on. It just hummed. I figured it would start in a minute, and I let it do it's thing. Well, it kept humming then started to smell kinda like burning plastic and wisps of smoke came up. I called Intex and after a long conversation, they sent me a new pump motor. Well, I just set that one up tonight taking extra care to make sure that no air was in the system. Yet, again, when I turned it on, it just hummed and did not move water at all. I turned it off, checked the hoses, and even changed the darn hose (thinking maybe something in it was blocked that I couldn't see), and nothing worked. (It should be noted that I disconnected the skimmer and other things inside the pool to make sure there wasn't a blockage there either.) At this point, I don't know what to do... My pool is green (I know, I need to get shock for it), and my relatives are coming to my house in TWO WEEKS. Help!!!