We are just looking at opening our pool this year - because my GF has been out of work since last August (anyone need a Senior Software Engineer?) we had been planning on not opening in order to reduce the expense, but the extended family wants us to....
Last year, I was seeing symptoms that made me think the Hydrostatic Relief valve (pop-off) in the main drain may be leaking. The pool is a 1980's vintage gunnite, and the valve has been a problem in the distant past, back when we still hired professionals to fix the thing, so I'm fuzzy on the details... Last replacement was probably in the late 90's - and the repair guy said that the valves usually need replacing every 15-20 years because the sealing O-ring dries out and starts seeping...
Symptoms - more water loss than seems reasonable for evaporation, plus need to add more salt and stabilizer mid season, which shouldn't be needed if the only loss is evaporation... No problems found in examining the skimmer and return openings, plumbing, etc. Basically the valve is the only thing not checked....
One of the problems is that I don't remember what the pool repair guy took out and replaced - how 'standard' are these valves? I don't know what make the main drain is, but the skimmer is Hayward, or at least the lid is... All I remember is that he unscrewed it and then screwed in the replacement, but no details beyond that....
Can the valve be changed without draining the pool? If so, should I fill it and get it swimmable, or have my helper brave the 'green lagoon' before I top it up? (local water use restrictions make draining / refilling sketchy from a legal standpoint...)
Any particular techniques for removing the old valve / installing new?
If necessary, would it be ok to remove the valve and plug the hole with a stopper while taking the old one to the store to get a matching replacement?
Anything else I should have known to ask?
Thanks
Gooserider
Last year, I was seeing symptoms that made me think the Hydrostatic Relief valve (pop-off) in the main drain may be leaking. The pool is a 1980's vintage gunnite, and the valve has been a problem in the distant past, back when we still hired professionals to fix the thing, so I'm fuzzy on the details... Last replacement was probably in the late 90's - and the repair guy said that the valves usually need replacing every 15-20 years because the sealing O-ring dries out and starts seeping...
Symptoms - more water loss than seems reasonable for evaporation, plus need to add more salt and stabilizer mid season, which shouldn't be needed if the only loss is evaporation... No problems found in examining the skimmer and return openings, plumbing, etc. Basically the valve is the only thing not checked....
One of the problems is that I don't remember what the pool repair guy took out and replaced - how 'standard' are these valves? I don't know what make the main drain is, but the skimmer is Hayward, or at least the lid is... All I remember is that he unscrewed it and then screwed in the replacement, but no details beyond that....
Can the valve be changed without draining the pool? If so, should I fill it and get it swimmable, or have my helper brave the 'green lagoon' before I top it up? (local water use restrictions make draining / refilling sketchy from a legal standpoint...)
Any particular techniques for removing the old valve / installing new?
If necessary, would it be ok to remove the valve and plug the hole with a stopper while taking the old one to the store to get a matching replacement?
Anything else I should have known to ask?
Thanks
Gooserider