Hi all, first time poster here. Been having problems with a blue cloudy pool all season so far so after alot of reading here decided to make the investment into a TF-100 test kit. Love the kit!
I have a 21' x 4' round above ground vinyl pool with sand filter.
Initial readings were as follows:
PH 8.2
FC .5
CC 0
TC .5
TA 180
CYA ~10-15 (filled the cylinder to the top and the black dot is hazy but visible so I'm estimating)
Pool calc says to add 35oz of CA. I had some granular CA on hand and didn't want to overshoot so added about 20oz.
Calc also calls for 98oz of 6% bleach. Should I add that in about an hour as well?
Also, how concerned should I be with the high PH and TA readings at this time?
Thanks in advance for any advice!!
Chris
Sent from my XT1585 using Tapatalk
I have a 21' x 4' round above ground vinyl pool with sand filter.
Initial readings were as follows:
PH 8.2
FC .5
CC 0
TC .5
TA 180
CYA ~10-15 (filled the cylinder to the top and the black dot is hazy but visible so I'm estimating)
Pool calc says to add 35oz of CA. I had some granular CA on hand and didn't want to overshoot so added about 20oz.
Calc also calls for 98oz of 6% bleach. Should I add that in about an hour as well?
Also, how concerned should I be with the high PH and TA readings at this time?
Thanks in advance for any advice!!
Chris
Sent from my XT1585 using Tapatalk