Today I finally got my pH to 7.4 and T Alkalinity to 80.
I read the article Water Balance for SWGs. It seems that it is recommending
FC 4-6 ppm
pH 7.5 - 7.8
TA 60-80
CYA 70-80
To achieve the above levels poolmath says to use:
80oz 6% bleach 10 cups
18oz backing soda
85oz stabilizer CYA
My chemistry was:
FC 3
TC 3
CC 0
pH 8
TA 90
CYA 42
I have read the SWGs are a major cause of high pH 8+.
Has anyone used the guidelines in the article and how successful have you been keeping the the levels especially pH at at the level indicated?
Thanks So much
Bill
I read the article Water Balance for SWGs. It seems that it is recommending
FC 4-6 ppm
pH 7.5 - 7.8
TA 60-80
CYA 70-80
To achieve the above levels poolmath says to use:
80oz 6% bleach 10 cups
18oz backing soda
85oz stabilizer CYA
My chemistry was:
FC 3
TC 3
CC 0
pH 8
TA 90
CYA 42
I have read the SWGs are a major cause of high pH 8+.
Has anyone used the guidelines in the article and how successful have you been keeping the the levels especially pH at at the level indicated?
Thanks So much
Bill