The SWG does not have a way to control the run time ... the power should be supplied to the SWG from the same timer as used for the pump.
You just set the % output (which is the % of generating time vs not generating time) and the time controls the on/off.
Sorry to revive an old thread. There a good number of threads on the Circupool SWGs but not a lot on the wiring installation and the Circupool manuals leave a lot to be desired on detaied information.
My question would be, with a VS pump (1.5 HP Superflo VS) that has timer functions programmable within the pump itself, how would I wire the RJ-60+ with it to run when the pump is on?
-Mickey