Great to find this site. Thank you. After testing with a cheap kit that was provided by the pool builder, I received my K2006 today and initial results are as follows.
FC= .2 ppm (seems really low?)
CC= .4 ppm
pH= 8, needed 2 drops to get to 7.4
TA= 60
CH= 130
CYA= my black dot never dissappeared, nor was the water sample cloudy after mixing w/ reagent for 30 seconds. Too low to read?
I obviously have some work to do. In what order should I knock these out?
FC= .2 ppm (seems really low?)
CC= .4 ppm
pH= 8, needed 2 drops to get to 7.4
TA= 60
CH= 130
CYA= my black dot never dissappeared, nor was the water sample cloudy after mixing w/ reagent for 30 seconds. Too low to read?
I obviously have some work to do. In what order should I knock these out?